noisybox.net

blogs tagged noise RSS feed Atom feed


Viewing entries 7 to 1 [9 matching entries]
S1 show
Thursday, November 20th 2014 8:59am
Tags: s1 pdx noise portland mshr

Fantastic noise show at S1 tonight.  Excellent sets all around!  I didn't capture much, but the MSHR set was absolutely amazing and I offer up a few clips:

Infiltration Lab played a live, hour-long drone/noise set on KBOO FM on February 1st, 2010.

infiltration lab

In the unfortunate event that KBOO loses funding or they change their url scheme or de-archives material or bombs hit Portland or whatever, I have also archived the show on archive.org. Hopefully this embedded player continues to work:

A few random tech details: I played the set on my audiopint computer that I built a couple years ago, running some Pd patches that I designed specifically for this show. As usual, the computer (as underpowered as it is!) had no problems keeping up. All sounds in the recording were rendered through Pd in realtime. Some audio material (for the granular synthesis) was taken from a(n unnamed) commercial recording, and the spoken sample material was mixed blind (previously unheard by me) from a psychological tape sourced at the Goodwill bins.

This piece is intended to be a contrast of sorts, a juxtaposition, and an overt psychological response to the reflection of time collapse. There really is no time. If your current self could revert to its earlier self in an instant, what would that event sound like?

Many thanks to Sean for having me. May radio live on!

Rock the Cradle Of Love Grunts
Wednesday, June 24th 2009 10:59pm
Tags: billyidol sound noise audio cutup

Sometimes when bogged down by responsibility I can find it rejuvenating to embrace the right kind of distraction.

billy idol

So my distraction involved hearing a radio cut of the Billy Idol hit "Cradle of Love" and finally following thru on a long-time desire to cut the thing into its most fundamental (read: important) parts: The grunts.

"That's right!" Sir Cyborg Himself. Despite having such a HUGE hit in the 90s, there are probably between zero and 3 people on the planet who actually know all the lyrics -- it's a slurred bozo fest of nonsense sexual innuendo and rockstar spittle. Simply brilliant.

So I leave you with "Rock The Cradle of Love Grunts".

After more than a year, Infiltration Lab has released a new 3" CDR.

incisor

As always, mp3 audio is freely available for download from from archive.org. (Although apparently right now there's a problem with the post, ug. Will update later when the dust settles...sorry).

This little abstract recording is a 22 minute trek into the insufferable human psyche. It was composed mostly for several pure data (pd) patches and instruments (like the cracklebox and atari punk console) that I built earlier this year. The foldout covers are printed in full color, and the CD labels were each individually hand drawn and painted.

All things considered, I'm pleased with the final recording product. I do wish I would have spent more time on the final mix (the sound/range is a bit low, so crank it up loud!) and made things a bit louder, but the end result is a rich dynamic range balanced on a lofi string of radio and electromush.

Cracklebox page is alive.
Thursday, May 31st 2007 10:58pm
Tags: cracklebox electronics noise

cracklebox

I finally got around to putting up a page for the cracklebox project I completed a few weeks back. Really a fun device...will be incorporating much more of it in near future recordings.

The Grimley/Menche/SVS show last weekend was so really totally fun and amazing and impressive on all kinds of levels. Very inspiring. Grimley is on the radio right now...wish I would have had a chance to meet him and chat with him.

Smoking, APC, pd patches
Friday, January 19th 2007 11:33pm
Tags: apc electronics noise

I finished up my version of the Atari Punk Console (APC) a few days ago. At its core, it's just a simple 555-based oscillator

apc

but I added a few twists (LEDs, speaker, switched caps and resistors). Even though I wanted to incorporate some of those nice Wacky Willy's piezos, I just couldn't hack anything decent sounding with minimal components...so I tossed it and opted for action over a drawn-out design period. I like that it's gritty and analog while still throwing out that low-res 8-bit sound that's all the rage these days...and it sounds especially nice and thick when bathed in effects.

I used the APC thing as a means to revisit board design, layout, and crafting, since it had been quite some time since I last did one. I maybe even picked up a few tricks along the way (ie. I never actually tried nail polish before etching to fill in pits/gaps). It's nice to build again.

I'd like to pick up micros again, mostly PIC or AVR, and I'd prefer to have a USB-powered programmer that supported in-circuit action. The arduino is a popular and flexible choice...and although it's slick, I still think it's kinda pricey. I'd rather spend a little more on a nice flexible usb programmer (Linux and windows support preferred) and roll my own bread/etched boards...got any good suggestions?

This week marked our 1-year quit mark for the quitting of the smoking! Really, it seems like only yesterday...and even tho I still crave on occasion, it's certainly become easier with each passing day. The Bikram yoga has certainly been instrumental in the success.

Finally, I posed a few new pd patches and an update or two over on my pd page.

The last Dorkbot PDX meeting was virtual because of the extreme snow and dangerous road conditions...the one before that was excellent and drew quite a few new faces. It was certainly a record for the most contraptions on the table....I hope that trend continues! It's kinda exciting to be living during this trippy time of convergence and appreciation of technological weirdness...

It's been some time, mostly because I intentionally delayed posting because of a drawn-out server migration. That's right, I've finally migrated noisybox.net (and related sites) off the 2U VA Linux beast and onto a newer, quieter, more efficient box with more storage. It's true: Noisybox is literally less noisy! Since I last posted, I did manage to get overlays and a manual for the Alltalk device I described before. Through some very simple testing, I have concluded that the Alltalk requires the battery to be present and charged to function properly. I haven't yet had time to do additional troubleshooting, but I suspect something else may be going on in the power circuits. More on that later. For now, I have scanned the manual and inserts and made them available on an Alltalk page. A few really good notes on the Linux/Debian front that I discovered recently...the Jack HEAD branch has finally incorporated the "clockfix" for dual core AMD64 users like myself! This means that the jackd server can now (from 0.102.20 onward) be started with -c option ("-c hpet" for amd64 I believe) to choose the clock source and prevent drift in tight realtime setups. This hasn't made it into Debian unstable yet, but I'm sure it will soon. Similarly, tight realtime users (like myself) used to have to run a patched version of PAM (libpam) that understands the new kernel's approach to setting realtime limits for users. Fortunately, Debian unstable now contains 0.79-4 of libpam-runtime that understands the rtprio settings. One note -- my patched version seemed to use "rt_priority", but the new stuff uses "rtprio"...don't let that sneak up on you! atu xv I recorded a 3" CDR during the summer and slowly mixed it into a reality sometime in September. The album is called Atu XV, and I finally managed to make it available online (also here and here). Ever since I moved back to Portland, I've been wanting to do the tour of the Shanghai Tunnels that run underneath part of downtown. Last week was the Day of the Dead, and I was fortunate enough to make it to the Soriah+Lana performance that was held in the friggin tunnels. The performance was really enjoyable, I'm certainly glad I crawled underground to be there. I emerged with an evil smirk and a renewed appreciation for the great things Portland has to offer. Last, certainly not least, the PDX Dorkbot is continuing to come together...if you live in the area, drop by one of the meetings, join the mailing list, and help us out. We're mostly looking for chairs and a projector, but we can use all other variety of goods and services. If I stop procrastinating, I'll be giving a short talk about the p5 glove and pd at the first "real" meeting.